The Performance of Jatropha Curcas Linn. Capsule Husk as Feedstocks Biogas in One Phase Anaerobic Digestion

Jatropa curcas Linn. (JcL) capsule husk was not recommended as biogas feedstocks. However for biorefinery purpose, several technologies have been conducting to solve this problem. This research reported quantity and quality comparison of Dry Husk Jcl (DH-JcL) in one phase system of batch digester compare with semi continuous digester. HDPE drum of 80 L working volume used as digester with 40 days hydraulic retention time. Feeding of DH-Jcl and solvent water was mixed on concentration of 1: 8. Research conclusion showed that semi continuous digester was better than batch digester. Biogas quality showed that methane content can reach 66.61% to 83.15% and biogas quantity in semi continuous digester can reach 0.016 m³ · kg^–1 DH JcL. The result was not in optimize condition yet because ratio number of volatile fatty acids/ alkalinity showed 0.5, it was indicated unstable anaerobic degradation process of DH-JcL.     

Potts models with magnetic field: Arithmetic,geometry, and computation

We give a sheaf theoretic interpretation of Potts models with external magnetic field, in terms of constructible sheaves and their Euler characteristics. We show that the polynomial countability question for the hypersurfaces defined by the vanishing of the partition function is affected by changes in the magnetic field: elementary examples suffice to see non-polynomially countable cases that become polynomially countable after a perturbation of the magnetic field. The same recursive formula for the Grothendieck classes, under edge-doubling operations, holds as in the case without magnetic field, but the closed formulae for specific examples like banana graphs differ in the presence of magnetic field. We give examples of computation of the Euler characteristic with compact support, for the set of real zeros, and find a similar exponential growth with the size of the graph. This can be viewed as a measure of topological and algorithmic complexity. We also consider the computational complexity question for evaluations of the polynomial, and show both tractable and NP-hard examples, using dynamic programming.     

Synthesis,Characterisation and Crystal Structures of Two Bi‐oxadiazole Derivatives Featuring the Trifluoromethyl Group

The synthesis, characterisation, and crystal structure determination of the closely related compounds 3,3′‐bi‐(5‐trifluoromethyl‐1,2,4‐oxadiazole) and 5,5′‐bi‐(2‐ trifluoromethyl‐1,3,4‐oxadiazole) are reported. These two compounds are known for their bioactivity; however, in this study they serve as model compounds to evaluate the suitability of the heterocyclic oxadiazole ring system for energetic materials when the fluorine atoms in the exocyclic CF₃ groups are substituted successively by nitro groups. Quantum chemical calculations for the bi‐1,3,4‐ oxadiazole derivatives with difluoronitromethyl, fluorodinitromethyl, and trinitromethyl groups have been carried out and predict promising energetic performances for both explosive and propulsive applications.     

Columnar Liquid‐Crystalline Dinaphthoperylenetetracarboxdiimides

Although the double Friedel–Crafts acylation of arenes with ethyl chloroglyoxylate is hindered by the strongly deactivating effect of the first‐entering glyoxylic substituent, the double reaction is successful with the reactive arene perylene under long reaction times and with concomitant ester hydrolysis. The reaction is regiospecific, giving the 3,9‐regioisomer exclusively. This perylenylenediglyoxylic acid is condensed first with o‐bromophenylacetic acid and then with α‐branched alkylamines to yield the title compounds. Whilst the corresponding tetraalkyl esters only show monotropic mesophases, these diimides show enantiotropic columnar mesophases that can be maintained at room temperature if racemically branched alkyl chains of moderate size are used. A palladium‐induced C?C bond migration during the build‐up of the arene system leads to an isomeric side product of reduced symmetry that can be isolated by aggregation‐controlled chromatographic separation. The HOMO and LUMO energies of the title compounds are considerably higher than those of established perylenetetracarboxdiimides.     

New soft porous frameworks based on lambda-zirconium phosphate and aliphatic dicarboxylates: Synthesis and structural characterization

New dicarboxylate-functionalized pillared materials with a general formula of λ-ZrPO₄(OH)_1-x(OOC(CH₂)_nCOO)_x/2(dmso) (n=6, 8 and 10) have been prepared by post-synthesis modification of the inorganic layers of λ-zirconium phosphate (λ-ZrP), where the superficial Chloride monovalent anionic ligands of λ-layer are partially exchanged with the divalent anionic ligands of a series of long-chain aliphatic dicarboxylic acids, namely octanedioic acid, decanedioic acid and dodecanedioic acid. The synthesized materials are characterized by X-ray diffractometry, FT-IR spectrophotometry, elemental and thermogravimetric analyses. The X-ray diffraction patterns show that the obtained solid phases are pure. Furthermore, the interlayer distance of λ-ZrP systematically increases from 1.02 to 1.59 nm as a result of the incorporation of the mentioned acids inside the interlayer gallery.     

Highly fluorescent polycaprolactones decorated with di(thiophene‐2‐yl)‐diketopyrrolopyrrole: A covalent strategy of tuning fluorescence properties in solid states

Well‐defined 1,4‐diketo‐3,6‐di(thiophen‐2‐yl)pyrrolo[3,4‐c]pyrrole (DTDPP) labeled polycaprolactones (PCL) with different chain lengths were synthesized and characterized. The effect of polymer chain lengths on the optical properties of DTDPP in solid states was studied by UV‐Vis absorption spectroscopy as well as steady‐state and dynamic fluorescence spectroscopies. Our results indicate that when the PCL side chain is extended to a certain length, the intermolecular aggregation of DTDPP units can be reduced significantly due to segregation effect of PCL. This approach offers a new facile strategy to address the common problem of aggregation‐caused quenching existing in organic fluorophores. These highly fluorescent biodegradable PCL polymers may find broad biomedical applications such as fluorescence‐based bioimaging and tissue engineering. © 2015 Wiley Periodicals, Inc. J. Polym. Sci. Part A: Polym. Chem. 2015 , 53, 1032–1042     

Synthesis of diblock copolymers by combination of organocatalyzed ring‐opening polymerization and atom transfer radical polymerization using trichloroethanol as a bifunctional initiator

This study reports an application of trichloroethanol (TCE) as a bifunctional initiator for the synthesis of block copolymers (BCPs) by organocatalyzed ring‐opening polymerization (OROP) and atom transfer radical polymerization (ATRP). TCE was employed to synthesize a low dispersity poly (valerolactone) macroinitiator, which was subsequently used for the ATRP of tert‐butyl methacrylate. While it is known that TCE can serve as an initiator in ATRP, the ability to induce polymerization under OROP is reported for the first time. The formation of well‐defined BCPs was confirmed by gel permeation chromatography and ¹H NMR. Computational studies were performed to obtain a molecular‐level understanding of the ring‐opening polymerization mechanism involving TCE as initiator. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 563–569